TV Mounting in Bedford, Nova Scotia
Updated: November 2026
TV mounting in Bedford costs $99 for TVs up to 43 inches, $129 for 44 to 65 inches and $179 for 66 to 85 inches with your own mount on drywall, the same flat rate as the rest of HRM and no travel fee. We cover Larry Uteck, Bedford South, Sunnyside, Mill Cove, Oakmount, Eaglewood and the Bedford Highway condos, same-day most days, 15 to 20 minutes from our base in Hammonds Plains.
What does TV mounting cost in Bedford?
| Setup | Price |
|---|---|
| Up to 43 inches, your mount, drywall | $99 |
| 44 to 65 inches | $129 |
| 66 to 85 inches, two technicians | $179 |
| 86 inches and up | from $249 |
| Plaster and lath / brick or stone / concrete or metal studs | +$20 / +$79 / +$59 |
| Above a fireplace, heat check included | +$69 |
| Hide wires: channel / in-wall / in-wall with power kit | $49 / $119 / $219 |
| Mount from us: fixed / tilt / full-motion | $59 / $79 / $119 |
A 65-inch TV on drywall in Bedford South is $129 with your own mount. The same TV with a tilt mount from us and the cables inside the wall is $129 + $79 + $119 = $327. A 55-inch on a concrete wall in a Mill Cove condo with the wires in a channel is $129 + $59 + $49 = $237. Prices are before HST and you pay after the job; the calculator gives your exact total and the full TV mounting cost in Halifax page has every add-on.
Or text a photo of the wall to 782-446-6322 for an exact price in minutes. No deposit, you pay after the job.
Which Bedford neighbourhoods do you cover?
- Larry Uteck and Bedford South: subdivisions and townhouse rows built since the mid 2000s, drywall on wood studs, open-concept main floors with long cable runs.
- Bedford Highway and Mill Cove: apartment and condo buildings on the water, concrete on the outside walls and metal studs inside; elevator bookings.
- Sunnyside, Bedford Hills and Basinview: 1960s to 1980s split-entries and bungalows, drywall on wood studs, standard price.
- Oakmount, Eaglewood and the Ravines: 1980s and 1990s two-storeys, drywall, gas fireplaces in many living rooms.
- Paper Mill Lake, Moirs Mill and Bedford West: newer builds along the lake and up the hill, drywall, often a stone or tile fireplace surround.
- Bedford Range and Nine Mile: the edge of Bedford toward Hammonds Plains, same price, usually the shortest drive for us.
Not on the list but near Bedford? Text the address: if it is inside HRM it is the same price as Bedford. The service-area page covers all of HRM zone by zone.
What walls are common in Bedford homes?
Larry Uteck, Bedford South and Bedford West. Built since the mid 2000s: half-inch drywall over wood studs at 16 inches, the standard $99 to $179 price. The catch is the floor plan. Open-concept great rooms put the TV on a feature wall with the outlet low and far away, so most of these jobs add a wire run: a paintable channel for $49, cables inside the wall for $119, or in-wall with a recessed power kit for $219 so the power cord disappears too. The hide TV wires in Halifax guide shows which one fits which wall. Townhouse party walls can be metal studs, which take snap toggles instead of lag bolts, +$59.
Mill Cove and the Bedford Highway buildings. Condo and apartment towers with poured concrete on the outside walls and steel studs on the inside ones. Concrete takes sleeve anchors with a hammer drill and dust control, +$59; a photo of the wall tells us which one you have before we arrive. See concrete walls and metal studs. Renting? The rental and condo page covers the landlord-friendly setup.
Sunnyside, Oakmount, Eaglewood. 1960s to 1990s houses, drywall on wood studs, the simplest wall in HRM. Gas fireplaces are common in the 80s and 90s two-storeys; a TV above one gets the heat check and a tilt mount, +$69.
How soon can you come to Bedford?
Same day most days when you book before noon, evenings until 10pm, every day of the week. Bedford is 15 to 20 minutes from our base in Hammonds Plains by the Hammonds Plains Road or Highway 102, so a Bedford slot is one of the easiest to fit in. A drywall job takes 45 to 60 minutes; concrete or in-wall wiring 1.5 to 2 hours. 2-hour arrival window, a text when we are on the way, and $20 off if we miss the window.
Do you charge a travel fee to Bedford?
No. Bedford is Halifax Regional Municipality, and every address in HRM is the same flat price with no travel charge: Larry Uteck, Mill Cove or Bedford South, it makes no difference. We only quote a travel fee outside HRM, and we tell you that number before you book. Also serving Sackville and Hammonds Plains next door. Text or WhatsApp the address to 782-446-6322 if you want to be sure.
Or text a photo of the wall to 782-446-6322 for an exact price in minutes. No deposit, you pay after the job.
Questions from Bedford customers
My Bedford South living room has the outlet on the far wall. Can you still hide the wires?
Yes. On drywall we run HDMI and other low-voltage cables inside the wall for $119, or add a recessed power kit for $219 so the TV has its own outlet behind it with no electrician. On a long run across an open-concept room the paintable channel for $49 is sometimes the honest option, and we say so before we start.
Do you mount TVs in the Bedford Highway condos?
Yes. We ask about elevator bookings and quiet hours before we come, bring dust control for concrete, and keep the holes to what the building allows. Concrete or metal studs add $59, and the wires go in a paintable channel for $49 because a concrete wall has no cavity.
Can you supply the mount in Bedford?
Yes. A fixed mount is $59, tilt $79, full-motion $119, each rated for your TV size and carried in the van. If you already bought one, we use it as long as it matches the TV's VESA pattern and weight.
Can I book an evening in Bedford?
Yes. We work every day from 9am to 10pm, and evening slots in Bedford are usually easy to get.